|
PI-2000 Data Generator | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Configuration: | 8 to 40 channels in 8 channel increments |
| Dimensions: | 7.0" H x 17.5" W x 25.0" D |
| Power: | 105/240 VAC @ 50/60Hz |
| Clock Characteristics: | |
|
Rate: |
12KHz to 150MHz |
|
Period Jitter: |
<100ps |
|
Resolution: |
< 0.2% of programmed frequency |
| Output Characteristics: | |
|
Channel to channel skew: |
|
|
Rise/fall time: |
|
|
Output Impedance: |
50 |
|
Pulse Duration: |
6.67nsec minimum NRZ mode, 3.33ns RZ mode |
|
Levels: |
TTL/ECL (software selectable) |
| TTL Levels: | maximum 2.5V into 50 Ohms |
| ECL Levels: | require
far end termination (50 |
| Rise/fall time slew rate: | >
1.5V/ns into 50 |
| RZ and NRZ Modes: | individually selected on each channel |
| Invert and Non-Invert: | individually selected on each channel |
|
individually selected on each channel |
| External Clock Input (SMA Connector): | TTL or ECL levels (selected by software) |
| External Clock Output (SMA Connector): | ECL levels back terminated into
50 |
| Subpatterns: | |
|
Max length: |
32768 (32K) |
|
Min length: |
12 |
|
Max number of subpatterns: |
2730 |
|
Repeat: |
512 per first level program line |
| Program Lines: | |
|
Max number of distinct lines: |
262144 (256K) |
|
Max repeats per line: |
32768 (32K) |
|
Total number of lines: |
|
| Looping: | Limited only by the total number
of lines in the program |
| Programming Capabilities: | |
|
Pause: |
at the end of the current subpattern |
|
Continue: |
continues execution from where it paused or from the beginning |
|
Programmable Start: |
from any line in the program |
|
Step mode: |
programmable execution length defined in steps (subpatterns) |
|
Compatible with: |
IEEE-488 GPIB, PI-PAT software and existing software developed for the PI-5800A Data Generator |
|