| Home | |
| Turnkey Systems | |
| Products | |
 |
Pattern Generators |
|
|
Clock Drivers |
|
|
|
|
|
Data Acquisition |
|
|
Mainframes |
|
|
Accessories |
| Software | |
| About | |
| Support | |
| News | |
| Contact/Sales | |
| Search | |
| Pulse Research Lab | |
| Top | |
PI-4000 Ordering Information |
Products > Low-Noise DC Bias/Clock Drivers > 4000 Series > Ordering Information |
System Components
See also the bias and driver selection guides for quick comparison of card models. |
Clock Driver Cards42460 Dual Channel Driver CardTwo channels of 20 MHz drivers (>20 volt amplitude). The output voltage range is ±20 V, with independent high and low voltage settings. The inputs to the Card can be optically isolated. The card also contains voltage and current sense capability, which allows muxing of the current or voltage output measurements from all the Driver Channels in the system to a single DVM. The card allows independent programming of the rise and fall time of each channel in as low as one nanosecond increments. 40460 Dual Channel Driver CardTwo channels of 8 to 10 MHz drivers (20 volt amplitude). The output voltage range is ±20V, with independent high and low voltage settings. The inputs to the Card are optically isolated. The card also contains voltage and current sense capability, which allows muxing of the current or voltage output measurements from all the Driver Channels in the system to a single DVM. The card allows independent programming of the rise and fall time of each channel as low as one nanosecond increments. 40461 Dual Channel Driver CardTwo channels of 8 to 10 MHz drivers (25 V amplitude). The output voltage range is ±25V, with independent high and low voltage settings. The inputs to the Card are optically isolated. The card also contains voltage and current sense capability, which allows muxing of the current or voltage output measurements from all the Driver Channels in the system to a single DVM. The card allows independent programming of the rise and fall time of each channel as low as one nanosecond increments. 40465 Dual Channel Tri-Level Driver CardTwo channels of 10MHz drivers, that can be operated as standard Two-Level Drivers or operated as two channels of Tri-Level Drivers. In the Two-Level mode, the input to each driver channel requires one channel of TTL level timing. Tri-and four level modes require a second clock input. In the Tri-Level Mode, the output from lowest rail to high rail can be 18.5V. Like the 40460 the rise and fall time as well as the high and low voltage levels of each channel is programmable. 40490 65 MHz Single Channel Driver CardOne channel, 65 MHz driver with an output voltage capability of ±20V. There are two inputs--a standard input with up 65 MHz capability and an optically isolated input with 20 MHz capability. Either input can be selected. The Driver outputs are floating with reference to the PI-4001 Control Mainframe. The output Delay is programmable from 30 ns to 100 ms, and the output Width is programmable from 7 ns to 100 ms, to facilitate clock strobe time positioning for applications such as interleaving data from high-speed multiplexers. The outputs of the driver are back-terminated into 50 Ohms. |
Low-Noise DC Bias Cards42750 Four Channel Low Noise DC Bias Card (NEW!)Four channels of DC Bias output that provide ±20 V with a 1 Hz noise specification of 350 nV/√Hz, or set to a lower range of ±10 V with a noise level of 250 nV/√Hz at 1 Hz. Supplies 100 mA of current per channel with a maximum of 300 mA/card. Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 1.25 mV. Selectable 50 mA or 100 mA current protection. 42751 Four Channel DC Bias Card with Programmable Current Limit (NEW!)Four channels of DC Bias output that provide ±20 V with independently programmable current limits for each channel. Supplies 100 mA of current per channel with a maximum of 300 mA/card. Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 1.25 mV. 40750 Four Channel Low Noise DC Bias CardFour channels of DC Bias output that provide ±20 V with a 1 Hz noise specification of 350 nV/√Hz, or set to a lower range of ±10 V with a noise level of 250 nV/√Hz at 1 Hz. Supplies 25 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.25 mV. 40751 Four Channel Low Noise DC Bias CardFour channels of DC Bias output that provide ±25 V with a 1 Hz noise specification of 350 nV/√Hz, or set to a lower range of ±12.5 V with a noise level of 250 nV/√Hz at 1 Hz. Supplies 25 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.25 mV. 40752 - Four Channel Low Noise DC Bias CardFour channels of DC Bias output that provide ±20 V with a 1 Hz noise specification of 400 nV/√Hz, or set to a lower range of ±10 V with a noise level of 300 nV/√Hz at 1 Hz. Supplies 100 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.25 mV. 40753 - Four Channel Low Noise DC Bias CardFour channels of DC Bias output that provide ±25 V with a 1 Hz noise specification of 400 nV/√Hz, or set to a lower range of ±10 V with a noise level of 300 nV/√Hz at 1 Hz. Supplies 100 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.25 mV. 40755 - Two Channel Low Noise DC Bias CardTwo channels of DC Bias output that provide ±20 V with a 1 Hz noise specification of 450 nV/√Hz, or set to a lower range of ±10 V with a noise level of 350 nV/√Hz at 1 Hz. Supplies 250 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.25 mV. 40757 - Two Channel Low Noise DC Bias CardTwo channels of DC Bias output that provide -20/+36 V with a 1 Hz noise specification of 800 nV/√Hz, or set to a lower range of -10/+18 V with a noise level of 300 nV/√Hz at 1 Hz. Supplies 25 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.5 mV. 40758 - Two Channel Low Noise DC Bias CardTwo channels of DC Bias output that provide -20/+36 V with a 1 Hz noise specification of 800 nV/√Hz, or set to a lower range of -10/+18 V with a noise level of 300 nV/√Hz at 1 Hz. Supplies 100 mA of current per channel with a Sense port for remote measurement of the Current and Voltage levels using an external DVM. Programming level resolution down to 0.5 mV. |
4000 Series | Datasheet |